Note: (1) Four BPDs are required for p5-595 servers equipped with one
#7813 processor book and four or fewer I/O drawers.

p5-595 Servers using Powered Expansion Rack (#5792) with Battery
Backup (#6200)

             1 Processor    2 Processor    3 Processor    4 Processor

                  Book          Books          Books          Books

 
The number of Bulk Power Regulators (BPRs, #6186) and Bulk Power

 Distribution (BPD) Assemblies (#7837) varies, depending on the

 number of processor books, I/O drawers, and battery backup or

 media drawer features installed, as well as the racking

 configurations and power line cords. The following tables provide

 the number of BPRs and BPDs required for each combination.

 
p5 595 Servers using Powered Expansion Rack (#5792) and Bolt-on

 Expansion Rack (#8691) without Integrated Battery Backup

 (#6200) (3,4)

 
 


                 1 Processor  2 Processor  3 Processor  4 Processor

                    Book(2)      Books(2)     Books(2)     Books (2)

461,1467c1523,1529

 3 Drawers     4      2(1)    8      4       8      4       8      4

 4 Drawers     6      4(1)    8      4       8      4       8      4

 5 Drawers     6      4       8      4       8      4       8      4

 6 Drawers     6      4       8      6       8      6       8      6

 7 Drawers    NA     NA       8      6       8      6       8      6

 8 Drawers    NA     NA      10      6      10      6      10      6

 9 Drawers    NA     NA      10      6      10      6      10      6

      3 Drawers   4      2(1)  6      4     6      4     6(3)   4

      4 Drawers   4      2(1)  6      4     6      4     6(3)   4

      5 Drawers   6      2(1)  8      4     8      4     8      4

      6 Drawers   6      2(1)  8      4     8      4     8      4(3)

      7 Drawers  NA     NA     8      4     8      4     8      4(3)

      8 Drawers  NA     NA     8      6     8      6     8(3)   6

      9 Drawers  NA     NA     8      6     8      6     8(3)   6

469,1470c1531,1532

 11 Drawers   NA     NA      10      8      10      8      10      8

 12 Drawers   NA     NA      10      8      10      8      10      8

      11 Drawers NA     NA    10      6    10      6    10      6(3)

      12 Drawers NA     NA    10      6    10      6    10      6(3)

473,1478c1535,1556

 
Note: (1) Four BPDs are required for p5-595 servers equipped with one

 #7813 processor book and four or fewer I/O drawers.

 
p5-595 servers using #8691 unpowered Expansion Rack without

 Integrated Battery Backup (#6200)

 
          1 Processor Book  2 Processor Books

           ----------------  -----------------

 
Note: (1) Four BPDs are required for p5 595 servers equipped with

 one #7813, turbo processor book. These extra BPDs are

 needed to power the fans required for the turbo

 processor book.

 
Note: (2) Standard (#7988) or Turbo (#7813) Processor Books.

 The BPRs and BPDs specified above indicate the system

 total quantity located in both the system CEC Rack and,

 when used, the powered Expansion Rack.

 
Note: (3) This table may be used when 60 amp Line Cords (#8688,

 #8689, #8694) are used for the system CEC Rack w/o IBB.

 With 60 amp Line Cords, the above noted BPRs & BPDs are

 increased by two above that stated in the table. With this

 table, either 60 amp or 100 amp Line Cords can be used

 with both the system CEC or powered Expansion Racks.

 
Note: (4) This table can not be used when the Media Drawer -

 rack mounted (#5795) is used.

 
 


      p5 595 servers using #8691 unpowered Expansion Rack without

      Integrated Battery Backup (#6200) (3,4)

                 1 Processor  2 Processor

                    Book(2)      Books(2)

                 -----------  -----------

487c1565

 7 Drawers    NA     NA          6      6

      7 Drawers  NA     NA     6      4

495,1500c1573,1632

 
Note: (1) Four BPDs are required for p5-595 servers equipped with one

 #7813 processor book and four or fewer I/O drawers.

 
p5-595 Servers using #8691 unpowered Expansion Rack with

 Integrated Battery Backup (#6200)

 
          1 Processor Book  2 Processor Books

           ----------------  -----------------

 
Note: (1) Four BPDs are required for p5 595 servers equipped with

 one #7813, turbo processor book and four or fewer I/O

 drawers. These extra BPDs are needed to power the fans

 required for the turbo processor book.

 
Note: (2) Standard (#7988) or Turbo (#7813) Processor Books. The

 BPRs and BPDs specified above indicate the system total

 quantity located in both the system CEC Rack and, when

 used, the powered Expansion Rack.

 
Note: (3) This table may be used when 60 amp Line Cords (#8688,

 #8689, #8694) are used for the system CEC Rack w/o IBB.

 With this table, either 60 amp or 100 amp Line Cords

 can be used with the system CEC Rack.

 
Note: (4) This table can not be used when the Media Drawer - rack

 mounted (#5795) is used. This table can not be used when

 the Powered Expansion Rack (#5792) used.

 
     p5 595 Servers using Powered Expansion Rack (#5792) and Bolt-on

      Expansion Rack (#8691) with Integrated Battery Backup (#6200) (3/4)

                 1 Processor  2 Processor  3 Processor  4 Processor

                    Book(2)      Books(2)     Books(2)     Books (2)

                 -----------  -----------   ----------  ------------

                 BPRs   BPDs  BPRs   BPDs  BPRs   BPDs  BPRs   BPDs

                 ----   ----  ----   ----  ----   ----  ----   ----

      1 Drawer    2      2(1)  4      4     6      4     6      4

      2 Drawers   4      2(1)  6      4     6      4     6      4

      3 Drawers   4      2(1)  8(4)   4     8(4)   4     8(4)   4

      4 Drawers   6      2(1)  8      4     8      4     8      4

      5 Drawers   6      2(1)  8      4     8      4     8      4

      6 Drawers   6      2(1)  8      6(4)  8      6(4)  8      6(4)

      7 Drawers  NA     NA     8      6     8      6     8      6

      8 Drawers  NA     NA    10      6    10      6    10      6

      9 Drawers  NA     NA    10      6    10      6    10      6

      10 Drawers NA     NA    10      8(4) 10      8(4) 10      8(4)

      11 Drawers NA     NA    10      8(4) 10      8(4) 10      8(4)

      12 Drawers NA     NA    10      8    10      8    10      8

  


 


 
Note: (1) Four BPDs are required for p5 595 servers equipped with

 one #7813, turbo processor book. These extra BPDs are

 needed to power the fans required for the turbo

 processor book.

 
Note: (2) Standard (#7988) or Turbo (#7813) Processor Books. The

 BPRs and BPDs specified above indicate the system total

 quantity located in both the system CEC Rack and, when

 used, the powered Expansion Rack.

 
Note: (3) This table may be used when 60 amp Line Cords (#8688,

 #8689, #8694) are used for the system CEC Rack w/IBB.

 With this table, either 60 amp or 100 amp Line Cords may

 be used with both the system CEC or powered Expansion

 Racks.

 
Note: (4) This table is required when the Media Drawer - rack

 mounted (#5795) is used. With a #5795 Media Drawer, the

 above noted BPRs and BPDs are two less than stated in

 the table. Use of the #5795 Media Drawer precludes use of

 IBB (#6200).

 
 


      p5 595 Servers using #8691 unpowered Expansion Rack with Integrated

      Battery Backup (#6200) (3,4)

                 1 Processor  2 Processor

                    Book(2)      Books(2)

                 -----------  -----------

506c1638

 4 Drawers     4      4(1)       6      4

      4 Drawers   4      4     6      4

508c1640

 6 Drawers     4      4          6      4

      6 Drawers   4      4     6      6(3)

513,1514c1645,1647

 11 Drawers   NA     NA          6      6

 12 Drawers   NA     NA          6      6

      11 Drawers NA     NA     8(3)   6

      12 Drawers NA     NA     8      6

  


516,1517c1649,1665

 
Note: (1) Four BPDs are required for p5-595 servers equipped with one

 #7813 processor book and four or fewer I/O drawers.

 
Note: (1) Four BPDs are required for p5 595 servers equipped with

 one #7813, turbo processor book and three or fewer I/O

 drawers. These extra BPDs are needed to power the fans

 required for the turbo processor book.

 
Note: (2) Standard (#7988) or Turbo (#7813) Processor Books. The

 BPRs and BPDs specified above indicate the system total

 quantity located in both the system CEC Rack and, when

 used, the powered Expansion Rack.

 
Note: (3) This table is required when the Media Drawer - rack

 mounted (#5795) is used. With a #5795 Media Drawer, the

 above noted BPRs and BPDs are two less than that

 stated in the table. This table may be used when 60 amp

 Line Cords (#8688, #8689, #8694) are used for the system

 CEC Rack w/IBB. With this table, either 60 amp or 100

 amp Line Cords may be used with the system CEC Rack.

 
Note: (4) This table can not be used when the Powered Expansion Rack

 (#5792) used.

525,1531c1673,1687

 
The primary Integrated Battery Backup (#6200) is used to back up

 the power subsystem mounted in the front of the system or powered

 Expansion Racks.  If battery backup is desired, one feature number

 6200 should be ordered for each BPR in the front power subsystem.

 Refer to the "p595 system configurations" for diagrams showing

 positioning of the battery backup units within the various combinations

 of system and expansion racks available

 
The primary Integrated Battery Backup (#6200) is used to back up the

 power subsystem mounted in the front of the system CEC or powered

 Expansion Racks. It interfaces to the power regulators (BPRs) with

 the feature number 6240 cable. If battery backup is desired, one

 feature number 6200 is required to be ordered for each BPR in the

 front power subsystem of the CEC and powered Expansion Racks. The

 primary battery backup features mount in the front of both the CEC

 and powered Expansion Racks. The first, second and third battery

 backup units are mounted in the 13U, 15U and 11U locations

 respectively within the CEC Rack. If a fourth or fifth primary

 backup feature is required, they will be mounted at the 13U and 17U

 locations respectively in the powered Expansion Rack. Refer to the

 "p5 595 system configurations" for diagrams showing positioning of

 the battery backup units within the various combinations of system

 and expansion racks available.

533,1538c1689,1711

 the power subsystem mounted in the back of the system or powered

 Expansion Racks.  If redundant battery backup is desired, one

 feature number 6201 should be ordered for each BPR in the rear

 power subsystem.  Refer to the "p595 system configurations" for

 diagrams showing positioning of the battery backup units within the

 various combinations of system and expansion racks available.

 the redundant power subsystem mounted in the back of the system

 CEC Rack. Whereas, IBB feature 6200 is used to backup the redundant

 power subsystem mounted in the rear of the powered Expansion Rack.

 Redundant IBB interfaces to the power regulators (BPRs) in the CEC

 Rack with the feature number 6240 cable, and feature number 6242

 cable is used to interface  with the power regulators in the powered

 Expansion Rack. If redundant battery backup is desired, one

 feature number 6201 is required to be ordered for each redundant BPR

 in the rear power subsystem of the CEC Rack. Also, one feature

 number 6200 is required to be ordered for each redundant BPR in the

 rear power subsystem of the powered Expansion Rack. All redundant

 Integrated Battery Backup features mounted in the powered and

 bolt-on Expansion Racks are mounted in the front of each  rack;

 whereas, they are mounted in the rear of the CEC Rack behind the

 primary IBB features. The first, second and third battery backup

 units are mounted in the 13U, 15U and 11U locations respectively

 behind the primary IBB features in the rear of the CEC Rack. If a

 fourth or fifth primary backup feature is required, they will be

 mounted at the 15U and 13U locations in the front of the powered and

 bolt-on Expansion Racks respectively. Refer to the "p5 595 system

 configurations" for diagrams showing positioning of the battery

 backup units within the various combinations of system and expansion

 racks available.

600,1602d1772

 
Only adapters supported on the p5-595 feature I/O drawers are

 supported in 7040-61D I/O drawers, if attached.  Unsupported adapters

 must be removed before attaching the drawer to the p5-595 server.

660c1830

 
p595 system configurations

 
p5 p595 system configurations

708c1878

 
p595 system configurations

 
p5 p595 system configurations

755c1925

 
p595 system configurations

 
p5 p595 system configurations

234a2405

 
(#4644) - 7045-SW4 Migrated Drawer Indicator

283a2455,2456

 
(#2737) -  Keyboard/Mouse Attachment Card - PCI

 
(#6230) - Advanced SerialRAID Plus Adapter

284a2458

 
(#2848) - POWER GXT135P Graphics Accelerator

287a2462

 
(#2946) - Turboways 622 Mbps PCI MMF ATM Adapter

291a2467,2468

 
(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter

 
(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter

292a2470,2471

 
(#4960) - IBM e-business Cryptographic Accelerator

 
(#4961) - IBM Universal 4-Port 10/100 Ethernet Adapter

293a2473

 
(#4963) - PCI Cryptographic Coprocessor (FIPS-4)

303a2484

 
(#6203) - PCI Dual Channel Ultra3 SCSI Adapter

304a2486,2490

 
(#6228) - 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus

 
(#6230) - Advanced SerialRAID Plus Adapter

 
(#6231) - 128 MByte DRAM Option Card

 
(#6235) - 32 MByte Fast-Write Cache Option Card

 
(#6239) - 2 Gigabit Fibre Channel PCI-X Adapter

305a2492

 
(#7817) - 1 Link Switch Network Interface, optical (p5 590/595)

314a2502,2503

 
(#3256) - Switch Cbl.(SNI)20M Optical

 
(#3257) - Switch Cbl.(SNI)40M Optical

358a2548

 
(#7923) - Switch Cbl.(SNI)3.5M Optical

359a2550,2551

 
(#7962) - Switch Cbl.(SNI)10 meter Optical

 
(#7963) - Switch Cbl.(SNI), 30 meter, Optical

362a2555,2560

 
(#3157) - 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 
(#3158) - 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 
(#3159) - 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly

 
(#3273) - 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

 
(#3274) - 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

 
(#3275) - 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

367a2566,2570

 
(#3627) - IBM P76/P77 Color Monitor, Business Black, Captured

 Cable

 
(#3628) - IBM P260/P275 Color Monitor, Business Black, and

 Cable

 
(#3635) - T210 Flat-Panel Monitor

488a2692,2695

 
(#6651) - Power Cord (9-foot), To Wall/OEM PDU,  (125V, 15A),

 Plug Type #75

 
(#6659) - Power Cord (9-foot), To Wall/OEM PDU,  (250V, 15A),

 Plug Type #76

505a2713

 
(#3756) - Service Tool Kit, High Performance Switch

534a2743

 
(#6243) - EMC Skirts/Tailgate

549a2759

 
(#0212) - Rack Content Specify: 7045/SW4 - 4U

566a2777,2791

 
(#0212) - Rack Content Specify: 7045/SW4 - 4U


 
Indicator of rack space utilization for 7045/SW4.

 


 
Attributes provided: Indicator of rack space utilization

 
Attributes required: 4U of rack space

 
For 9119-595: (#0212)

 


 
Minimum required: 0

 
Maximum allowed: 1   (Initial order maximum: 1)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


578c2803

 
Initial Order/MES/Both/Supported:  Initial

 
Initial Order/MES/Both/Supported:  Both

610c2835

 
Initial Order/MES/Both/Supported:  Initial

 
Initial Order/MES/Both/Supported:  Both

700c2925

 
For 9119-590:  (#2459)

 
For 9119-595:  (#2459)

810a3036,3052

 
(#2737) Keyboard/Mouse Attachment Card - PCI


 
This PCI card provides for connection of one keyboard and

 mouse.

 


 
Attributes provided: Keyboard/Mouse Attachment

 
Attributes required: Empty PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#2737)

 


 
Minimum required: 0

 
Maximum allowed: 4 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 4 per system; Max. 2 per I/O drawer.

836a3079,3097

 
(#2848) POWER GXT135P Graphics Accelerator


 
The POWER GXT135P is a versatile, low-priced 2D graphics

 accelerator for RS/6000 workstations and pSeries servers. It

 can be configured to operate in either 8-bit or 24-bit color

 modes

 


 
Attributes provided: 2D Graphics

 
Attributes required: 1 PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#2848)

 


 
Minimum required: 0

 
Maximum allowed: 4 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 4 per system; Max. 2 per I/O drawer.

949a3211,3237

 
(#2946) Turboways 622 Mbps PCI MMF ATM Adapter


 
The IBM Turboways 622 Mbps PCI MMF ATM Adapter is a 64-bit,

 Universal PCI Adapter. This adapter provides direct access to

 the ATM network at a dedicated 622 Mbps full-duplex connection.

 The Turboways 622 Mbps PCI MMF ATM Adapter is a short

 form-factor adapter that interfaces to the system via the PCI

 bus and connects to the 622 Mbps ATM network via dual-SC type,

 multi-mode fiber cables. The Turboways 622 Mbps PCI MMF ATM

 Adapter utilizes 16MB of SDRAM for control and 16MB of SDRAM

 for packet memory. This ATM adapter also provides a hardware

 assist for TCP checksum which can provide a performance

 improvement by minimizing the host CPU cycles .

 


 
Attributes provided: One full-duplex connection to 622 ATM

 network

 
Attributes required: One available PCI card slot

 
For 9119-595; FC #5791, #5794 or #4643: (#2946)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 10 per I/O drawer.

152a3441,3497

 
(#3157) 18.2 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly


 
The 18.2GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides

 18.2GB of storage capacity and supports the industry standard

 Ultra3 SCSI interface speed of up to 160 MBps

 


 
Attributes provided: 18.2GB of disk storage mounted in a

 carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3157)

 


 
Minimum required: One disk drive bay.

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 176 per system; Max. 16 per I/O drawer.

 
(#3158) 36.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly


 
The 36.4GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides

 36.4GB of storage capacity and supports the industry standard

 Ultra3 SCSI interface speed of up to 160 MBps.

 


 
Attributes provided: 36.4GB of disk storage mounted in a

 carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3158)

 


 
Minimum required: 0

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 176 per system; Max. 16 per I/O drawer.

 
(#3159) 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly


 
The 73.4 GB 10,000 RPM Ultra3 SCSI Disk Drive Assembly provides

 73.4 GB of storage capacity and supports the industry standard

 Ultra3 SCSI interface speed of up to 160 MBps.

 


 
Attributes provided: 73.4GB of disk storage mounted in a

  carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3159)

 


 
Minimum required: 0

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 176 per system; Max. 16 per I/O drawer.

176a3522,3580

 
Note: Intended for use with the powered Expansion Rack (#5792).

 This cable is too long for use with the bolt-on Expansion Rack (#8691).

 

 
(#3256) - Switch Cbl.(SNI)20M Optical


 
The Switch Cables, 20 meter Optical, are used within the pSeries

 High Performance Switch (HPS) network to enable optic connections

 between the switch port connection card (optical) within the HPS

 for switch to switch applications.  #3256 delivers an optical

 cable pair consisting of a tranmitter cable and receiver cable.

 It can also be used to connect the #7817 to the HPS.

 


 
Attributes provided: Switch Cables, 20 meter Optical

 
Attributes required: None

 
For 9119-595: (#3256)

 


 
Minimum required: 0

 
Maximum allowed: No max   (Initial order maximum: No max)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


 
(#3257) - Switch Cbl.(SNI)40M Optical


 
The Switch Cables, 40 meter Optical, are used within the pSeries

 High Performance Switch (HPS) network to enable optic connections

 between the switch port connection card (optical) within the HPS

 for switch to switch applications.  #3257 delivers an optical

 cable pair consisting of a tranmitter cable and receiver cable.

 


 
Attributes provided: Switch Cables, 40 meter Optical

 
Attributes required: None

 
For 9119-595: (#3257)

 


 
Minimum required: 0

 
Maximum allowed: No max   (Initial order maximum: No max)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


 
(#3273) 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly


 
The 36.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

 provides 36.4GB of storage capacity and supports the industry

 standard Ultra320 SCSI interface speed of up to 320 MBps.

 


 
Attributes provided: 36.4GB of disk storage mounted in a

 carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3273)

 


 
Minimum required: 0

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


177a3582,3620

 
Note: Max. 176 per system; Max. 16 per I/O drawer.

 
(#3274) 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly


 
The 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

 provides 73.4 GB of storage capacity and supports the industry

 standard Ultra320 SCSI interface speed of up to 320 MBps. .

 


 
Attributes provided: 73.4GB of disk storage mounted in a

 carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3274)

 


 
Minimum required: 0

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 176 per system; Max. 16 per I/O drawer.

 
(#3275) 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly


 
The 146.8 GB 10,000 RPM Ultra320 SCSI Disk Drive Assembly

 provides 146.8 GB of storage capacity and supports the industry

 standard Ultra320 SCSI interface speed of up to 320 MBps.

 


 
Attributes provided: 146.8GB of disk storage mounted in a

 carrier.

 
Attributes required: One disk drive bay.

 
For 9119-595; FC #5791, #5794 or #4643: (#3275)

 


 
Minimum required: 0

 
Maximum allowed: 112 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 176 per system; Max. 16 per I/O drawer.

263a3707,3783

 
(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable


 
The P76/P77 monitor has the following general characteristics:

 


 
Business Black color

 
17-inch Flat Trinitron (R) CRT with a viewable image size of

 406 mm (16.0 inches) measured diagonally, incorporating a

 0.24 mm stripe pitch for bright, high-definition images.

 
Designed to provide reduced flicker operation at an optimum

 1024 x 768 pels at up to 85 Hz non-interlaced, with a

 maximum addressability of 1600 x 1200 pels at 70 Hz.

 


 


 
Attributes provided: Color Monitor

 
Attributes required: Graphics Adapter

 
For 9119-595: (#3627)

 


 
Minimum required: 0

 
Maximum allowed: 4 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: Yes

 
Return parts MES: Does not apply

 


 


 
Note: The P76 and P77 monitors are functionally equivalent.

 
(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable


 
The P260/P275 monitor has the following general

 characteristics:

 


 
Business black color

 
21-inch Flat Trinitron (R) CRT with a viewable image size of

 503 mm (19.8 inches) measured diagonally, incorporating a

 0.24 mm stripe pitch for bright, high-definition images.

 
Designed to provide reduced flicker operation at an optimum

 addressability of 1600 x 1200 pels at up to 85 Hz

 non-interlaced.

 


 


 
Attributes provided: Color Monitor

 
Attributes required: Graphics Adapter

 
For 9119-595: (#3628)

 


 
Minimum required: 0

 
Maximum allowed: 4 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: Yes

 
Return parts MES: Does not apply

 


 


 
Note: The P260 and P275 monitors are functionally equivalent.

 
(#3635) T210 Flat-Panel Monitor


 
The T210 flat-panel monitor has the following general

 characteristics:

 


 
Business black color

 
21-inch TFT LCD digital screen with a viewable image size of

 528 mm (20.8 inches) measured diagonally, incorporating a

 0.207 mm pixel pitch/type for bright, high-definition

 images.

 
Designed to provide flicker free operation at a maximum

 resolution of 2048 x 1536 pels at 60Hz.

 
Tilt/swivel stand

 


 


 
Attributes provided: Color Monitor

 
Attributes required: Graphics Adapter

 
For 9119-595: (#3635)

 


 
Minimum required: 0

 
Maximum allowed: 4 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: Yes

 
Return parts MES: Does not apply

 


 


373a3894,3913

 
(#3756) - Service Tool Kit, High Performance Switch


 
This feature delivers the Service Took Kit for the High Performance

 Switch.  Remove this feature from additional 7045-SW4 orders to prevent

 multiple quantities of the Tool Kit from being shipped.

 Every installation location with an HPS 7045-SW4 must have access

 to one Service Tool Kit. Failure to have at least one available in

 a location may result in delayed or prolonged maintenance times.

 


 
Attributes provided: Service Tool Kit for 7045-SW4

 
Attributes required: 7045-SW4

 
For 9119-595: (#3756)

 


 
Minimum required: 0

 
Maximum allowed: 1   (Initial order maximum: 1)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


493a4034,4094

 
(#4644) 7045-SW4 Migrated Drawer Indicator


 
This feature indicates that a 7045-SW4 drawer is being migrated

 to a POWER5 rack environment.  It is used to determine rack level

 power and cable requirements for the migrated location.

 


 
Attributes provided: 7045-SW4 migrated drawer indicator

 
Attributes required: Empty valid switch drawer location

 
For 9119-595: (#4644)

 


 
Minimum required: 0

 
Maximum allowed: 1   (Initial order maximum: 1)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


 
(#4953) IBM 64bit/66MHz PCI ATM 155 UTP Adapter


 
The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated,

 155 Mbps full-duplex connection to ATM networks over either

 permanent virtual circuits (PVC) or switched virtual circuits

 (SVC). This adapter enables TCP/IP to run over an ATM network

 with Category-5 Unshielded Twisted Pair (UTP). It also supports

 communication with devices located on an ATM network or bridged

 to a Token-Ring, Ethernet, or other LAN.

 


 
Attributes provided: One ATM 155 UTP connector

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#4953)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 20 per I/O drawer.

 
(#4957) IBM 64bit/66MHz PCI ATM 155 MMF Adapter


 
The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct

 access to ATM networks. This 155 Mbps PCI ATM MMF Adapter

 provides dedicated 155 Mbps full-duplex connection using

 permanent virtual circuits (PVC) or switched virtual circuits

 (SVC) and enables TCP/IP to run over an ATM network. The

 adapter also supports communication with devices located on an

 ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

 


 
Attributes provided: One ATM 155Mbps MMF connection

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#4957)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 20 per I/O drawer.

525a4127,4187

 
(#4960) IBM e-business Cryptographic Accelerator


 
The IBM e-business Cryptographic Accelerator is a short form

 factor PCI Secure Socket Layer (SSL) hardware accelerator

 adapter. For Secure Web transaction, SSL operations is a key

 requirement. To do this, public-key cryptographic operations

 using SSL handshake protocol is employed. The IBM e-business

 Cryptographic Accelerator is a hardware cryptographic solution

 that off-loads this compute-intensive public-key cryptographic

 processing from the host.

 
The overall operation control, including command decoding, is

 implemented in hardware and requires no on-card microprocessor

 subsystem. As such, the adapter is a less expensive alternative

 to those who do not need the high security of the on-card

 secure programming environment such as is offered by

 the PCI Cryptographic Coprocessor(#4958),

 but do need the high cryptographic performance that hardware

 acceleration provides by offloading the host processor.

 
Note: The IBM e-business Cryptographic Accelerator is only

 supported by the industry standard PKCS #11 application

 programming interface (API) Version 2.01, and applications

 which interface to the PKCS #11 Support Program.

 


 
Attributes provided: Data encryption via PCI bus to host

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#4960)

 


 
Minimum required: 0

 
Maximum allowed: 8 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 8 per system; Max. 4 per I/O drawer.

 
(#4961) IBM Universal 4-Port 10/100 Ethernet Adapter


 
IBM Universal 4-Port 10/100 Ethernet Adapter is a single slot,

 long, 64-bit, 33 MHz PCI adapter supporting 4 industry standard

 Ethernet 10 Base-T or 100 Base-T interfaces either half or full

 duplex.  Each port is provided with it's own RJ-45 connector

 for attachment to standard CAT-3/5 Unshielded Twisted Pair

 (UTP) cable. The adapter is IEEE 802.3u compatible and provides

 full auto-negotiation for detecting speed and duplex capability

 across each port.

 
Network boot capability and Network Install Manager (NIM)

 capability are available using this adapter if no specific

 limitation is stated.

 


 
Attributes provided: 4 ports of 10/100 Base-Tx Ethernet

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#4961)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 20 per I/O drawer.

543c4205

 
After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the

 
The 10/100 Mbps Ethernet PCI Adapter II supports the

585a4248,4264

 
(#4963) PCI Cryptographic Coprocessor (FIPS-4)


 
This feature number is used to indicate the number of

 partitions the system will have running under AIX.

 


 
Attributes provided: Data encryption via PCI bus to host

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#4963)

 


 
Minimum required: 0

 
Maximum allowed: 8 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 8 per system; Max. 4 per I/O drawer.

066c4745,4746

 
Note: Max.  = 2 per I/O drawer.

 
Note: 1) Max. = 4 per I/O drawer.

 
Note: 2) Max. = 16 per system due to 1 10GB adapter per 2 CPUs.

091c4771,4773

 
Note: Max.  = 32 per system.  Max.  = 20 per I/O drawer.

 
Note: 1) Max. = 32 persystem. Max. = 20 per I/O drawer.

 
Note: 2) (#3925) - Serial Port Converter Cable, 9-pin to

 25-pin is required (0.3m).

214,4220c4896,4903

 
The media drawer feature provides the system three bays for media

 devices.  The media drawer is divided into front and rear sections.

 Each section of the media drawer is powered separately from the

 first system I/O drawer, either a 5791 or 5794, and must be cabled

 to two SCSI PCI adapters.  The front section contains two media bays

 and the rear section contains one media bay.  The device in the

 rear is only accessible from the rear of the system.

 
The media drawer feature provides the system three bays for

 media devices. The media drawer is divided into front and rear

 sections. Each section of the media drawer is powered

 separately from the first system I/O drawer, either a 5791 or

 5794, and must be cabled to separate ports of one or two SCSI

 adapters. The front section contains two media bays and the

 rear section contains one media bay. The device in the rear is

 only accessible from the rear of the system.

576a5260,5302

 
(#6203) PCI Dual Channel Ultra3 SCSI Adapter


 
The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI

 adapter which combines hardware and software to provide a wide

 variety of security services. The PCI Cryptographic Coprocessor

 (FIPS-4) is a second generation adapter of the Cryptographic

 Coprocessor family that provides high performance secure

 hardware engines for secure internet transactions such as

 transmitting data, verifying electronic signatures, bulk data

 encryption and decryption. In addition, the card is enclosed in

 a tamper proof enclosure to restrict access to on card

 resources, designed to FIPS 140-1 Level 4 standards.

 
Security functions supported by the adapter include:

 


 
DES (Data Encryption Standard) (40 and 56 bit key)

 encryption and decryption, with pre- and post-padding; the

 coprocessor uses both ECB (electronic and codebook) and CBC

 (cipher block chain) modes of encryption.

 
MAC (Message Authentication) generation and MAC verification

 services

 
Triple DES (three key) encryption and decryption of

 eight-byte units

 
Secure RSA key-pair generation

 
RSA signature generation and signature verification at 18

 signatures/sec at 2048 bits

 
Hardware random number generation

 
Secure data storage and retrieval

 
Other non-cryptographic security utilities can be carried

 out using the onboard processor

 


 


 
Attributes provided: Data encryption via PCI bus to host

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#6203)

 


 
Minimum required: 0

 
Maximum allowed: 10 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 10 per system; Max. 10 per I/O drawer.

613a5340,5531

 
(#6228) 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus


 
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus is a

 64-bit address/data, short form factor PCI adapter with LC type

 external fiber connectors that provides single or dual

 initiator capability over an optical fiber link or loop.  With

 the use of appropriate optical fiber cabling, this adapter

 provides the capability for a network of high speed local and

 remote located storage. The 2 Gigabit Fibre Channel Adapter for

 64-bit PCI Bus will uto-negotiate for the highest data rate

 (either 1Gps or 2Gps) of which the device or switch is capable.

 Distances of up to 500 meters running at 1Gbps data rate and up

 to 300 meters running at 2Gbps data rate are supported between

 the adapter and an attaching device or switch. When used with

 IBM supported Fibre Channel storage switches supporting

 long-wave optics, distances of up to 10 kilometers are capable

 running at either 1Gps or 2Gps data rates.

 
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus can be

 used to attach devices either directly, or by means of Fibre

 Channel Switches. If attaching a device or switch with a SC

 type fiber connector(s), use of an LC-SC Fibre Channel

 Conversion Cable (#2456) is required.

 


 
Attributes provided: 1 FC/FC-AL interface

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: (#6228)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 20 per I/O drawer.

 
(#6230)  Advanced SerialRAID Plus Adapter


 
The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2

 loop) Serial Storage Architecture (SSA) adapter providing an

 instantaneous data transfer rate of up to 160 MByte/s per loop.

 It also provides eight-initiator, non-RAID capability,

 two-initiator RAID 1, two-initiator RAID 0 + 1, two-initiator

 RAID 5, or one-initiator RAID 0 capability. The adapter accepts

 a 32 MByte Fast-Write Cache Option Card (#6235) that improves

 write performance in RAID 0+1, RAID 5, and non-RAID

 applications. When the 32 MByte Fast-Write Cache Option Card is

 used, the adapter can be configured in either single or dual

 initiator fast-write cache mode. In dual initiator fast-write

 cache mode, if one of the two adapters fail, the failing

 adapter is designed to transfer control over to the other.

 Also, in dual initiator Fast Write Cache mode, the 128 MByte

 DRAM Option Card (#6231) is available and required to utilize

 the full 32 MBytes of fast-write cache on the adapters. If the

 128 MByte DRAM Option Card is not used in dual initiator

 fast-write cache mode, the effective fast-write cache capacity

 will be 16 MBytes on each adapter. See the 128 MByte DRAM

 Option Card (#6231) for information.

 
The Advanced SerialRAID Plus Adapter when operated in a RAID 5

 configuration will support (2+P) to (15+P) arrays and up to 6

 (15+P) arrays. When operated in a RAID 1 or RAID 0+1

 configuration, will support up to eight disk drives mirrored.

 The adapter also supports Hot Spares in RAID 5 and RAID 0+1

 mode. The Advanced SerialRAID Plus Adapter also supports

 connectivity to external disk enclosures and internal RS/6000

 SSA configurations. Optional SSA Fiber-Optic Extender is also

 supported (Refer to IBM 7133 Sales literature for additional

 information).

 
Limitation: Internal ports on the adapter are not supported.

 See machine/model specific information to determine if internal

 SSA disk drives and associated hardware/cables are supported.

 


 
Attributes provided: Attachment of SSA devices

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643:  (#6230)

 


 
Minimum required: 0

 
Maximum allowed: 12 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 12 per system; Max. 12 per I/O drawer.

 
(#6231) 128 MByte DRAM Option Card


 
The 128 MByte DRAM Option Card (#6231) is a field only optional

 feature to the Advanced SerialRAID Adapter (#6225) or a factory

 or field option for the Advanced SerialRAID Plus Adapter

 (#6230). This option is recommended for dual initiator

 fail-over Fast Write Cache (FWC) configurations.  The option

 increases the existing DRAM on the adapter to 128 MBytes. In

 this type of dual initiator FWC configuration, the existing DRAM

 does not have enough capacity to completely contain a copy of

 each adapter's 32 MByte FWC and also provide additional working

 space. The 128 MByte DRAM Option Card provides this additional

 space needed to contain a full copy of each adapters 32 MByte

 FWC content and allows for full 32 MByte fail-over protection.

 If the 128 MByte DRAM Option Card (#6231) is not used with

 dual-initiator FWC configurations, the effective FWC capacity

 is reduced to 16 MBytes per adapter.

 
If this feature is ordered as a field upgrade to an existing

 SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate

 software and publications are also provided.

 


 
Attributes provided: 128 MByte DRAM memory

 
Attributes required: Advanced SerialRAID Adapter (#6225)

 or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte

 Fast-Write Cache Option Card (#6235) is also recommended.

 
For 9119-595:  (#6231)

 


 
Minimum required: 0

 
Maximum allowed: 12 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 12 per system; Max. 12 per I/O drawer.

 
(#6235) 32 MByte Fast-Write Cache Option Card


 
The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte

 fast-write optional feature that plugs into the IBM RS/6000

 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID

 Adapter Plus (#6230). It utilizes non-volatile RAM.  During the

 unlikely event of an Advanced SerialRAID Adapter failure, a

 replacement Advanced SerialRAID Adapter can be installed and

 the fast-write cache can be removed from the failing adapter

 and installed in the new adapter insuring data integrity.  The

 32 MByte Fast-Write Cache Option Card can provide a significant

 improvement of data throughput and response time during certain

 sequence write operations compared to SSA RAID adapters without

 the fast-write cache.  The response time and data transfer

 improvement using the optional card will vary depending upon

 the data block sizes, the percentage of sequential writes,

 machine type/model, and application parameters.  The 32 MByte

 Fast-Write Cache Option Card plugged into the Advanced

 SerialRAID Adapter (#6225) will operate in either non-RAID or

 RAID 5 mode, in single-initiator configurations. The 32 MByte

 Fast-Write Cache Option Card plugged into the Advanced

 SerialRAID Plus Adapter (#6230) will operate in non-RAID, RAID

 5, or RAID 0+1 mode, in single-initiator or dual initiator

 configurations.

 


 
Attributes provided: 32 MByte Fast-Write Cache

 
Attributes required: One Advanced SerialRAID Adapter (#6225)

 for Advanced SerialRAID Plus Adapter (#6230).

 
For 9119-595; FC #5791, #5794 or #4643:  (#6235)

 


 
Minimum required: 0

 
Maximum allowed: 12 (Initial order maximum: 0)

 
OS level required: AIX only

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 12 per system; Max. 12 per I/O drawer.

 
(#6239) 2 Gigabit Fibre Channel PCI-X Adapter


 
The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit

 address/data, short form factor PCI-X adapter with an LC type

 external fiber connector that provides single or dual initiator

 capability over an optical fiber link or loop.  With the use of

 appropriate optical fiber cabling, this adapter provides the

 capability for a network of high speed local and remote located

 storage. The 2 Gigabit Fibre Channel PCI-X Adapter will

 auto-negotiate for the highest data rate (either 1 Gbps or 2

 Gbps) of which the device or switch is capable.  Distances of

 up to 500 meters running at 1 Gbps data rate and up to 300

 meters running at 2 Gbps data rate are supported between the

 adapter and an attaching device or switch. When used with IBM

 supported Fibre Channel storage switches supporting long-wave

 optics, distances of up to 10 kilometers are capable running at

 either 1 Gps or 2 Gps data rates.

 
The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attach

 devices either directly, or by means of Fibre Channel Switches.

 If attaching a device or switch with a SC type fiber

 connector(s), use of an LC-SC 50 Micron Fiber Converter Cable

 (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable (#2459) is

 required.

 


 
Attributes provided: 1 Fibre Channel/FC-AL interface

 
Attributes required: One PCI slot

 
For 9119-595; FC #5791, #5794 or #4643: all239)

 


 
Minimum required: 0

 
Maximum allowed: 20 (Initial order maximum: 0)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Supported

 
CSU: No

 
Return parts MES: Does not apply

 


 


 
Note: Max. 20 per system; Max. 20 per I/O drawer.

681a5600,5619

 
(#6243) - EMC Skirts/Tailgate


 
#6243 is used when the High Performance Switch, 7045-SW4, is

 installed in the 9119-590 or 9119-595 rack.  It is also used for

 rack configurations that have the server SNI feature #7817.

 This feature drives the rack level EMC skirts/tailgate parts.

 If there is an expansion rack, #8691 bolted to the CEC rack,

 the expansion rack also requires a #6243.

 


 
Attributes provided: EMC Skirts/Tailgate

 
Attributes required: 7045-SW4 or #7817

 
For 9119-595: (#6243)

 


 
Minimum required: 0

 
Maximum allowed: 2   (Initial order maximum: 2)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


147a6086,6123

 
(#6651) Power Cord (9-foot), To Wall/OEM PDU, (125V, 15A), Plug Type #75


 
This power cord goes from the system and/or peripheral features to

 a wall-type outlet. Plug type #75 (KETI). Refer to Corporate

 Bulletin C-B-2-4700-009 for a description of plug types.

 The following countries/regions use the #6651 power cord to power

 the system and/or peripheral features requiring a power cord:  Taiwan

 


 
Attributes provided: Power cord

 
Attributes required: None

 
For 9119-595: (#6651)

 


 
Minimum required: 0

 
Maximum allowed: No max   (Initial order maximum: No max)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Both

 
CSU: Yes

 
Return parts MES: No

 


 


 
(#6659) Power Cord (9-foot), To Wall/OEM PDU, (250V, 15A), Plug Type #76


 
This power cord goes from the system and/or peripheral features to

 a wall-type outlet.  Plug type #76 (KETI).  Refer to Corporate

 Bulletin C-B-2-4700-009 for a description of plug types.

 The following countries/regions use the #6659 power cord to power

 the system and/or peripheral features requiring a power cord:  Taiwan

 


 
Attributes provided: Power cord

 
Attributes required: None

 
For 9119-595: (#6659)

 


 
Minimum required: 0

 
Maximum allowed: No max   (Initial order maximum: No max)

 
OS level required: None

 
Initial Order/MES/Both/Supported: Both

 
CSU: Yes

 
Return parts MES: No

 


 


215c6191

 
Maximum allowed:  1 (Initial order maximum:  1 )

 
Maximum allowed:  2 (Initial order maximum:  2)

217c6193

 
Initial Order/MES/Both/Supported:  Initial

 
Initial Order/MES/Both/Supported:  Both

713a6690,6710

 
(#7817) - 1 Link Switch Network Interface, optical (p5 590/595)


 
The 1 Link Switch Network Interface (SNI) for the p5 590/595

 provides the attachment to the pSeries High Performance Switch

 (HPS).  The 1 Link SNI plugs into the GX bus of the p5 590/595.

 Connection to the HPS is accomplished by using the optic switch

 cable features.

 


 
Attributes provided: 1 Link SNI to attach to the HPS

 (7045-SW4)

 
Attributes required: Available GX position in the p5 590/595

 
For 9119-595: (#7817)

 


 
Minimum required: 0

 
Maximum allowed: 8   (Initial order maximum: 8)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 
Note: Max of two #7817 per processor book.

 


156c7153

 
Initial Order/MES/Both/Supported:  Initial

 
Initial Order/MES/Both/Supported:  Both

310a7308,7328

 
(#7923) - Switch Cbl.(SNI)3.5M Optical


 
The Switch Cables, 3.5 meter Optical, are used within the pSeries

 High Performance Switch (HPS) network to enable optic connections

 between the switch network interface (SNI) features in the p5 590

 and the p5 595 to the switch port connection card (optical) within

 the HPS.  It is used when the switch is in the same rack as the

 CEC. #7923 delivers an optical cable pair consisting of a

 transmitter cable and receiver cable.

 


 
Attributes provided: Switch Cables, 3.5 meter Optical

 
Attributes required: None

 
For 9119-595: (#7923)

 


 
Minimum required: 0

 
Maximum allowed: No max   (Initial order maximum: No max)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


373d7390

 
(deletion)

389c7406

 
Initial Order/MES/Both/Supported:  Initial

 
Initial Order/MES/Both/Supported:  Both

396a7414,7457

 
(#7962) - Switch Cbl.(SNI)10 meter Optical


 
The Switch Cables, 10 meter Optical, are used within the pSeries

 High Performance Switch (HPS) network to enable optic connections

 between the switch network interface (SNI) features in the p5 590

 and p5 595 to the switch port connection card (optical) within the

 HPS.  It is used when the switch is in a different rack than the

 CEC. #7962 is also used for switch to switch applications.  #7962

 delivers an optical cable pair consisting of a transmitter cable

 and receiver cable.

 


 
Attributes provided: Switch Cables, 10 meter Optical

 
Attributes required: None

 
For 9119-595: (#7962)

 


 
Minimum required: 0

 
Maximum allowed: No Max   (Initial order maximum: No Max)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


 
(#7963) - Switch Cbl.(SNI), 30 meter, Optical


 
The Switch Cables, 30 meter Optical, are used within the pSeries

 High Performance Switch (HPS) network to enable optic connections

 between the switch network interface (SNI) features in the p5 590

 and p5 595 to the switch port connection card (optical) within the

 HPS.  It is used when the switch is in a different rack than the

 CEC. #7963 is also used for switch to switch applications.  #7963

 delivers an optical cable pair consisting of a transmitter cable

 and receiver cable.

 


 
Attributes provided: Switch Cables, 30 meter Optical

 
Attributes required: None

 
For 9119-595: (#7963)

 


 
Minimum required: 0

 
Maximum allowed: No Max   (Initial order maximum: No Max)

 
OS level required:

 
Initial Order/MES/Both/Supported: Both

 
CSU: No

 
Return parts MES: No

 


 


424,6428c7485,7490

 
(#7971) On/Off Processor Enablement for #7813


 
This feature can be ordered to enable your server for On/Off Capacity

 on Demand for processor book feature #7813.  Once enabled, you can

 request processors on a temporary basis.  You must sign an On/Off

 Capacity on Demand contract before you order this feature.

 
(#7971) On/Off Processor Enablement for #7813 or #7731


 
This feature can be ordered to enable your server for On/Off

 Capacity on Demand for processor book features #7813 or #7731.

 Once enabled, you can request processors on a temporary basis.

 You must sign an On/Off Capacity on Demand contract before

 you order this feature.

677,6681c7739,7744

 
(#7994) On/Off Processor Enablement for #7988


 
This feature can be ordered to enable your server for On/Off Capacity

 on Demand for processor book feature #7998.  Once enabled, you can

 request processors on a temporary basis.  You must sign an On/Off

 Capacity on Demand contract before you order this feature.

 
(#7994) On/Off Processor Enablement for #7988 or #7732


 
This feature can be ordered to enable your server for On/Off

 Capacity on Demand for processor book features #7988 or #7732.

 Once enabled, you can request processors on a temporary basis.

 You must sign an On/Off Capacity on Demand contract before

 you order this feature.

077a9141,9156

 

 
 

 

 

 

 

 

 


 Terms of use

 

 


 [

 Help

 ]

 


 


089,8090d9167

   |  

 Terms of use

093c9170

 Contact

 Contact