c1
3494-HA1 IBM TotalStorage Enterprise High Availability Tape Frames Model HA1
3494-HA1 IBM TotalStorage Enterprise High Availability Tape Frames Model
c3

3494-HA1 IBM TotalStorage Enterprise High Availability Tape Frames Model HA1


3494-HA1 IBM TotalStorage Enterprise High Availability Tape Frames Model


c5

Revised:  April 13, 2004.



Revised:  April 27, 2004.


9a30

0a32
HA1
37,151c139,152
when the 3494 configuration does not contain a Model HA1.
When Model HA1 Frames are attached, configurations of 3, 4,
6, 8, 10, 12, and 16 frames are allowed in addition to the two service
bays of the Model HA1 Frames. There must be a minimum of 4 library
frames if the DAA feature is installed. The Model B16 VTS can be
installed anywhere within the 16 frames. The IBM TotalStorage Enterprise
Tape Drive Expansion Frames (Models D10, D12 and D14) and the IBM
TotalStorage Enterprise Tape Storage Frames (Model S10) can also be
installed in any location in the 3494. Remote console support using
Distributed Console Access Facility (DCAF) for both library managers is
also available. No additional host software changes are needed to
support the Data Facility Storage Management Subsystem (DFSMS) and Basic
Tape Library Support (BTLS) MVS environments or to TPF, Virtual
Machine/Enterprise Systems Architecture (VM/ESA), and VSE/ESA guests of
VM/ESA.
when the 3494 configuration does not contain a Model HA1. When Model HA1
Frames are attached, configurations of 3, 4, 6, 8, 10, 12, and 16 frames
are allowed in addition to the two service bays of the Model HA1 Frames.
There must be a minimum of 4 library frames if the DAA feature is
installed. The Model B16 VTS can be installed anywhere within the 16
frames. The IBM TotalStorage Enterprise Tape Drive Expansion Frames
(Models D10, D12 and D14) and the IBM TotalStorage Enterprise Tape
Storage Frames (Model S10) can also be installed in any location in the
3494. Remote console support using Distributed Console Access Facility
(DCAF) for both library managers is also available. No additional host
software changes are needed to support the Data Facility Storage
Management Subsystem (DFSMS) and Basic Tape Library Support (BTLS) MVS
environments or to TPF, Virtual Machine/Enterprise Systems Architecture
(VM/ESA), and VSE/ESA guests of VM/ESA.
50,351c351,352

Corequisite: Must be on all
other models of the 3494 that are shipping new with the Model HA1 Frames.

Corequisite: Must be on all other models of the 3494 that are
shipping new with the Model HA1 Frames.

71c372
  • 3494 Model AX0, B10, B16, B18, B20, L10, L12, L14, and HA1
  • 3494 Model AX0, B10, B16, B18, B20, CX1, L10, L12, L14, L22, and HA1
    73a375,388
  • 3592 Model J70

    One of the following three features were used to provide remote
    support on previous installations of the 3494 Models L12 and L22. New
    shipments of a 3494 Model L12 or L22 should specify one of the IBM
    TotalStorage Master Console features (#2713, #2714, or #2715).

    (#2710) Remote Support Facility


    This feature supplies a cable and connectors for connection to an IBM
    supplied modem to enable remote diagnostic support. This feature should
    only be specified on the first unit of each set of fourteen units in an
    installation site.


    • Maximum: One of FC 2710, 2711, or 2712.
    • Field Installation: Yes.
      75,376d389

      One of the following two features should be selected based on the
      number of units in the installation.

      82,385c395,399
      installation site. Each Model HA1 must specify either FC 2711, or 2712.

      Maximum: One of FC 2711, or 2712.


      Field Installation: Yes.
      installation site.


      • Maximum: One of FC 2710, 2711, or 2712.
      • Field Installation: Yes.

      90,392c404,472
      installation site. Each Model HA1 must specify either FC 2711, or 2712.

      Maximum: One of FC 2711, or 2712.

      Field Installation: Yes.
      installation site.


      • Maximum: One of FC 2710, 2711, or 2712.
      • Field Installation: Yes.

      IBM TotalStorage Master Console Features


      The following features #2713, #2714, and #2715 provide connection to
      an IBM TotalStorage Master Console (TSMC) to enable enhanced remote
      support to improve availability. The TSMC can remotely monitor each
      attached device to determine if it is working properly and report any
      error alerts for the early detection of problems. Use of the TSMC may
      expedite microcode updates, reduce service times, and enhance local
      service. One of these features must be ordered on any new 3494 Tape
      Library Model L12, or L22 instead of the Remote Support features (#2710,
      #2711, or #2712). They are recommended on every installed 3494 Tape
      Library. Any 3494 VTS, 3590 Model A60, or 3592 Model J70 in a 3494
      library should also attach to the IBM TotalStorage Master Console. The
      same master console for service may be shared between the following
      units:


      • 3494 Model AX0, B10, B18, B20, HA1, L10, L12, L14, or L22
      • VTC in a 3494 Model CX1
      • 3590 Model A60
      • 3592 Model J70

      To connect a unit to an IBM TotalStorage Master Console, one of the
      following three features must be selected on the unit based on the number
      of units attached to that master console facility in the installation.

      (#2713) Master Console For Service


      This feature provides the IBM TotalStorage Master Console, an Ethernet
      hub and a cable and connectors for connection of one of the above units
      to an IBM supplied modem to enable remote enhanced service. This feature
      should be specified on the first unit in an installation connected to a
      master console facility. The Ethernet hub provides 14 additional
      connections for cables supplied with feature #2714 or #2715.


      • Minimum: One of feature #2713, #2714, or #2715 is required on all
        new orders of a 3494 Model L12 or L22.
      • Maximum: One of #2713, #2714, or #2715. A maximum of one of feature
        #2714 may be connected to the Master Console For Service feature #2713.
      • Plant or field installable.

      (#2714) Console Expansion


      This feature provides an attachment cable for connection of one of the
      above units, and an Ethernet hub for expanding the number of units that
      can be attached to the Master Console For Service (#2713). Up to 14
      additional connections are provided by this feature for connection of
      #2715 or another #2714.


      • Minimum: One of feature #2713, #2714, or #2715 is required on all
        new orders of a 3494 Model L12 or L22.
      • Maximum: One of #2713, #2714, or #2715. A maximum of one other
        Console Expansion (#2714) may be connected to the Ethernet hub provided
        by this feature #2714. A maximum of two of feature #2714 may be included
        in a single master console facility (providing a total maximum of 43 unit
        connections).
      • Plant or field installable.

      (#2715) Console Attachment


      This feature provides a cable to attach a unit to the Ethernet hub
      provided by the Master Console For Service (#2713) or the Console
      Expansion (#2714). A maximum of 40 of feature #2715 may be included in a
      single master console facility.


      • Minimum: One of feature #2713, #2714, or #2715 is required on all
        new orders of a 3494 Model L12 or L22.
      • Maximum: One of #2713, #2714, or #2715.
      • Plant or field installable.

      14,416c494,496
      feature #9040 (High Availability Attachment) to any
      installed Model L1x that does not already have
      feature #9020 (Model B20, B10, or B18 Attachment).
      feature #9040 (High Availability Attachment) to any installed Model L1x
      that does not already have feature #9020 (Model B20, B10, or B18
      Attachment).