Improve Performance and Reduce Latency

• IBM XA-64e(TM) third generation chipset includes an integrated processor and memory controller that substantially reduces system latency that bottlenecks commercial applications.

• Support for XceL4v Dynamic Server Cache.

• 64-bit Intel Xeon MP up to 3.66GHz(4) with /1MB L2 Cache.

• Support for 32-bit and 64-bit applications with Intel EM64T.

• Dual-bus architecture plus 667 MHz front side bus delivers 3X improvement in CPU bandwidth over the previous generation.

• High availability Active Memory(TM) with including support for Chipkill, Memory Mirroring, and Memory ProteXion(TM).

• 2 GB of high-speed PC2-3200 memory; expandable to 64GB (when 4GB DIMMs become available).

• Six 64-bit Active PCI-X 2.0 Slots support up to 266MHz.

• Up to six 2.5-inch Serial Attach SCSI (SAS) HDDs with optional RAID 0, 1, 5, 1E, 00, 10, 50, 1E0, 5EE ServeRAID 8i SAS controller available without using a system PCI-X slot. RAID 60 is supported by the ServeRAID-8i but not in the x366, because RAID 60 requires eight drives.

• High-performance integrated dual gigabit Ethernet

• Optional Remote Supervisor SlimLine Adapter II (RSAII) for advanced remote systems management (integrated IPMI-compliant BMC standard).

• 3U rack-optimized tool-free chassis.

Note: (4) GHz and MHz denote the internal and/or external clock speed of the microprocessor only, not application performance. Many factors affect application performance.

Leverage High Availability and Increased Security

• Support for Chipkill and ECC in the integrated processor and memory controller to help correct single-, two-, three-, and four-bit memory errors. leveraging industry-standard DIMMs

• Support for advanced Memory ProteXion at no additional cost. Support for optional memory mirroring with access to all DIMM slots

• Active PCI-X 2.0 slots, support hot-add and hot-swap of I/O adapters, support for the latest high-performance PCI-X 2.0 adapters up to 266 MHz, and backward compatibility with PCI and PCI-X 1.0 legacy adapters.

• Hot-swap hard drive bays and redundant fans to enable replacement of select components without powering down the server.

• Support for up to two hot-swap, redundant 1300W power supplies

• Predictive Failure Analysis (PFA) on processors, voltage regulator modules (VRMs), memory, fans, power supply, and HDD options to help warn of problems before they occur

• IPMI-compliant basic hardware monitoring and alerting with an optional upgrade to the advanced RSAII SlimLine, helping to protect server availability through continuous system monitoring and delivering true remote management capabilities

• Innovative light path diagnostics and top access design; easy to service and configure

Service and support perfected for e-business

• ServerGuide and IBM Director
• ServerProven compatibility testing and Web support
• Three-year on-site(5) limited warranty(6)

Note: (5) IBM sends a technician after attempting to diagnose and resolve the problem remotely.

Note: (6) For information on the IBM Statement of Limited Warranty, visit:

http://www.ibm.com/servers/support/machine_warranties/

Alternatively, this information is also available by contacting your IBM representative or reseller. Copies are available upon request. Visit:

http://www.ibm.com/pc/safecomputing/

Periodically visit for the latest information on safe and effective computing.

Related options

xSeries 3.16 GHz 667 MHz 1 MB L2 Cache Upgrade for 64-bit Xeon Processor MP (13N0694) supports internal processing speeds of 3.16 GHz and external processing operations to memory at 667 MHz. It contains an integrated, full-speed, 1 MB level-2 cache.

xSeries 3.66 GHz 667 MHz 1 MB L2 Cache Upgrade for 64-bit Xeon Processor MP (13N0695) supports internal processing speeds of 3.66 GHz and external processing operations to memory at 667 MHz. It contains an integrated, full-speed, 1 MB level-2 cache.

These processor options are supported up to four-way SMP applications in the IBM eServer xSeries 366. A VRM, specifically designed to support this xSeries server, is included.

ServeRAID 8i SAS Controller (13N2227) performs with Serial Attached SCSI (SAS) Raid technology. The ServeRAID 8i is a Zero Channel RAID (ZCR) controller manages your internal data storage in selected xSeries servers. The ServeRAID 8i controller achieves higher performance and up to 10 times higher transfer rates at 3GB/second than its Ultra-320 SCSI predecessors for a nominal increase in price.

The half-length adapter runs on a dedicated system's PCI-X 64-bit ZCR slot at speeds up to 133 MHz. With the onboard 256Mb memory and 600MHz Intel processor, the ServeRAID 8i takes RAID processing workload and offloads it directly to the controller. This allows your CPU ample bandwidth to perform the application processing required.

ServeRAID 8i SAS Controller offers:

• RAID levels include 0, 1, 10, 5, 50, 60, and IBM exclusive 1E, and 5EE.

• Performance up to 3GB/seconds of throughput.

• ServeRAID 8i supports independent and adjustable stripe sizes of 256k and 512k.

• Additional ServeRAID features such as Logical Drive Migration, Global Hot Spare, Copyback, and Flashcopy are available to manage your storage drives.

• Battery backed memory provides added protection for your valuable data.

• Rebuild and rapid restore features to preserve RAID configurations.

• ServeRAID Manager software application is available for managing the SAS RAID array configurations.

Raid Manufacturing Instructions

• 32R0700 - RAID 0 - SAS Primary Array - minimum of 1 HDD required
• 32R0701 - RAID 1 - SAS Primary Array - 2 HDDs required
• 32R0702 - RAID 1E - SAS Primary Array - 3 HDDs required
• 32R0703 - RAID 5 - SAS Primary Array - minimum of 3 HDDs required
• 32R0704 - RAID 5EE - SAS Primary Array - minimum of 4 HDDs required
• 32R0705 - RAID 0 - SAS Secondary Array - minimum of 1 HDD required
• 32R0706 - RAID 1 - SAS Secondary Array - 2 HDDs required
• 32R0707 - RAID 1E - SAS Secondary Array - 3 HDDs required
• 32R0708 - RAID 5 - SAS Secondary Array - minimum of 3 HDDs required
• 32R0709 - RAID 5EE - SAS Secondary Array - minimum of 4 HDDs required
• 32R0720 - Internal - RAID - Setup
• 32R0721 - Internal - RAID - Setup by Customer

Remote Supervisor SlimLine Adapter II (73P9341) is a daughter card enabling diagnostic, reset, POST, and auto recovery functions from remote locations and monitoring of temperature, voltage, and fan speed; alerts generated when thresholds are exceeded without utilizing an I/O slot

Add another 1,300-watt, voltage sensing, hot-swap power supply.

1,300-watt power supply Worldwide (13M7413)

2 GB (2x1GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM (73P2866) contains two 1 GB DIMMs.

4 GB (2x2GB Kit) PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM (73P2867) contains two 2 GB DIMMs.

8 GB (2x4GB Kit) PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM (30R5145) contains two 4 GB DIMMs.

Note: This option is planned to be available 3Q05.

These high-speed, DDR2 registered DIMMs are synchronized to the processor so that once addressed, data can be transferred on both edges of the clock signal. This takes advantage of the improved performance of the 667 MHz dual front-side bus architecture of the XA-64e third-generation chipset and the 64-bit Xeon MP processor. The memory bus transfers data at up to 5.3 GB per second;

Active Memory(TM) 4-slot Memory Expansion Card (13M7409) allows you to upgrade your x366 with four total memory expansion cards. System memory can be expanded to 64 GB by removing the two standard DIMMs and adding three additional memory expansion card options and a 4 GB PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM in each of the four DIMM sockets.

IBM Director 4.21 supports the x366. For more detailed information, including operating system support, see the IBM Director 4.21 compatibility document at:

http://www.ibm.com/

xSeries 366 Description

Standard xSeries 366 model configurations

  ________________________________________________________________
 | Models     Processor    L2 Cache   Memory    HDDs      Power  |
 |                                                        Supply |
 | --------   ------------ --------   --------  --------  ------ |
 | 8863-1RY   1 x 3.16 GHz  1 MB      2 GB ECC  open bay   one   |
 | 8863-2RY   1 x 3.66 GHz  1 MB      2 GB ECC  open bay   one   |
 | 8863-1RU   1 x 3.16 GHz  1 MB      2 GB ECC  open bay   one   |
 | 8863-2RU   1 x 3.66 GHz  1 MB      2 GB ECC  open bay   one   |
 | 8863-E1U   2 x 3.66 GHz  1 MB      4 GB ECC  3x36GB/8i  two   |
 | 8863-E2G   2 x 3.66 GHz  1 MB      2 GB ECC  open bay   one   |
 | 8863-E3x   1 x 3.16 GHz  1 MB      2 GB ECC  2x73GB     one   |
 | 8863-E4x   2 x 3.66 GHz  1 MB      2 GB ECC  2x73GB     one   |
 |_______________________________________________________________|

 

High-performance server subsystems

xSeries 366 servers are high-performance, four-socket 64-bit SMP-capable x86 mission-critical servers. The x366 combines breakthrough 4-socket performance on an 64-bit x86 server optimized for commercial enterprise applications deployed in the application-serving tier.

These models are equipped with powerful 64-bit Xeon MP processors up to 3.66 GHz and 1 MB L2 cache. This processor supports 64-bit extensions and compatibility with current 32-bit applications and system tools. Four connectors for Xeon MP processors are standard on the system board. High-speed PC2-3200 ECC DDR2 SDRAM provides excellent processor-to-memory subsystem performance.

As the first in a family of IBM eServer X3 systems, the xSeries 366 server is fine tuned and engineered to optimize the powerful 64-bit Xeon MP processors. This architecture consists of the following components:

• 64-bit Intel Xeon MP processors on a highly reliable, high-performance 667MHz dual FSB architecture

• IBM XA-64e third-generation chipset with integrated processor and memory controller for reduced latencies and a high-throughput I/O southbridge supporting PCI-X 2.0 up to 266MHz

• EM64T Memory addressability supporting up to 64GB of max memory (when 4GB DIMMs become available) to reduce paging and improve overall server performance

• Updated high-performance server technologies such as serial-attached SCSI (SAS), DDR2-based Active Memory, and XceL4v Dynamic Server Cache

High-availability and serviceability features

Many enterprise mission-critical, run commercial applications around the clock to supply information across the globe. These environments require "ruggedly" dependable servers designed with features that can tolerate a component failure without total shutdown. IBM eServer xSeries 366 servers pack numerous fault-tolerant and high-availability features into a high-density, rack-optimized package that helps significantly reduce the space needed to support massive network computing operations without sacrificing performance or availability.

These features include:

• Active PCI-X 2.0 slots up to 266MHz; hot-add and hot-swap adapters in Windows and Linux environments:
  • See Limitations Section

• Six 2.5-inch Serial Attach SCSI (SAS) HDD bays

• Optional ServeRAID 8i controller supporting up to RAID 0, 1, 5, 1E, 00, 10, 50, 1E0, 5EE

• ECC DIMMs combined with an integrated advanced ECC memory controller with third-generation Chipkill support to correct many single-, two-, three-, and four-bit memory errors to minimize disruption of service to LAN clients

• Memory ProteXion and memory mirroring support

• Memory hardware scrubbing to correct many soft memory errors automatically without software intervention

• PFA on HDD options, memory, processors, VRMs, power supply, and fans in conjunction with IBM Director to help alert the system administrator of an imminent component failure

• Up to two 1300-watt power supplies that support typical configuration redundancy or full configurations requiring redundancy

• Eight, hot-swap, multispeed fans to provide cooling redundancy and enable individual fan replacement without powering down the server

• Optional RSAII SlimLine enabling diagnostic, reset, POST, and auto recovery functions from remote locations and monitoring of temperature, voltage, and fan speed; alerts generated when thresholds are exceeded without utilizing an IO slot

• Information LED panel, diagnostics LED panel, and component LEDs for visual indications of system well-being

• Light path diagnostics for an outside view of the potential problem without removing the cover to reduce downtime and service costs

• Easy top access to system board, adapter cards, power supplies, and memory

• CPU failure recovery in SMP configurations, allowing a failed processor to be forced offline, the server rebooted, an alert generated, and operation continued with the working processor

Performance scalability

IBM eServer xSeries 366 servers are designed for high performance on complex applications. They feature scalability of memory, I/O, and HDD storage for future growth potential.

The servers include:

• Substantial I/O expansion supporting up to six PCI-X 2.0 card slots including backward compatibility to existing legacy PCI and PCI-X adapters:

• Up to four-socket SMP operations with powerful new 64-bit Xeon MP processors

• 2 GB high-speed PC2-3200 DDR2 ECC memory standard, supporting up to 64 GB of system memory

• Support for up to two worldwide, voltage-sensing 1,300-watt, hot-swap power supplies with auto restart

• Six 2.5-inch hot-swap drive bays, supporting up to 440 GB of internal data storage (using six 73.4 GB SAS Hot-Swap HDDs)

• Optional ServeRAID 8i controller supporting up to RAID 0, 1, 5, 1E, 00, 10, 50, 1E0, 5EE

• Terabytes of external data storage with optional storage units, ServeRAID SCSI controllers, and Fibre Channel controllers

Systems management

IBM eServer xSeries 366 servers feature IBM Director, a powerful, highly integrated, systems management software solution built on industry standards and designed for ease of use. Exploit your existing enterprise or workgroup management environments and rich security features to access and manage physically dispersed IT assets more efficiently over the Internet. It can help reduce costs through potentially:

• Reduced downtime
• Increased productivity of IT personnel and end users
• Reduced service and support costs

IT administrators can view the hardware configuration of remote systems in detail and monitor the usage and performance of critical components such as processors, HDDs, and memory.

IBM Director includes IBM Director Extensions, a portfolio of server tools that integrates into the IBM Director interface and works with the RSAII SlimLine, or other systems-management monitoring functions contained in xSeries servers. Typical functions and monitoring capabilities can include:

• PFA-enabled critical hardware components
• Temperature
• Voltage
• Fan speed
• Light path diagnostics

The IT administrator gains comprehensive, virtual on-site control of xSeries servers through the ability to remotely:

• Access the server in many cases regardless of its status

• Inventory and display detailed system and component information

• View server bootup during POST

• Browse and delete logs of events and errors

• Reset or power cycle the server

• Run diagnostics, SCSI, RAID setup during POST

• Monitor thresholds on server health including:
  • Operating system load
  • POST time-out
  • Voltage
  • Temperature

• Set proactive alerts for critical server events including PFA on:
  • Processors
  • VRMs
  • Memory
  • Fans
  • Power supplies
  • HDDs

• Define automated actions such as:
  • Send an e-mail or page to an administrator
  • Execute a command or program
  • Pop up an error message to the IBM Director console

• Flash BIOS

• Monitor and graph the utilization of server resources such as:
  • Memory
  • Processor
  • HDDs

• Identify potential performance bottlenecks and react to prevent downtime

• Monitor, manage, and configure RAID subsystems without taking them offline

IBM Director Agent provides integration into leading workgroup and enterprise systems management environments, via Upward Integration Modules. This enables the advanced management capabilities built into xSeries servers to be accessed from:

• Tivoli Enterprise and Tivoli Netview
• Computer Associates Unicenter TNG
• HP OpenView
• Microsoft SMS
• BMC Patrol
• NetlQ

World-class support tools and programs

IBM eServer xSeries 366 servers include tools and programs designed to make ownership a positive experience. From the start, IBM programs help you purchase servers, get them running, and keep them running. IBM can help your company maintain ownership of technology leadership network servers.

• IBM on-site, three-year limited warranty with next-business-day service (same-business-day service optionally available) protects your investment if a problem occurs. This service also includes replacement of parts identified through PFA.

• The ServerProven(8) program lets you confidently configure your server with various devices and operating systems. This Web-based program provides compatibility information from actual testing of the IBM eServer xSeries 366 server with various adapters and devices.

• The ServerGuide CD library includes online publications and utilities and drivers that help you load popular network operating systems.

• Electronic support on the Web offers additional support in an easy-to-use format.

Note: (8) IBM makes no warranties, expressed or implied, regarding non-IBM products and services that are ServerProven, including but not limited to implied warranties of merchantability and fitness for a particular purpose. These products are offered and warranted solely by third parties.
Back to top
 

Product Positioning

Drawing upon latency-reducing mainframe-inspired technologies, IBM eServer X3 unleashes breakthrough 64-bit price-performance by combining the performance of the third-generation Enterprise X-Architecture chipset with the 64-bit capabilities of the latest Intel 64-bit Xeon MP processors to deliver the premiere industry-standard application server architecture. These xSeries 366 models enhance the xSeries High-Performance product line by introducing break-through x86 performance and price/performance for the newly emerging market of x86 64-bit servers targeted at commercial workloads and the application-serving tier. Positioned between the xSeries 346 and the xSeries 445 servers, the IBM eServer xSeries 366 server features a high-density, 3 U mechanical platform that supports the new 64-bit Xeon MP processors, PCI-X 2.0 architecture, and high-speed DDR 2 memory. IBM eServer xSeries 366 servers provide additional processing, I/O and memory expandability, and high-availability features over that of the xSeries 346 server. These features make them ideal for handling complex, business-critical commercial applications typical of application-serving tier such as ERP and CRM. The performance of the x366 also makes it well suited for consolidation of other uni, 2-way and 4-way servers through virtualization. The IBM eServer xSeries 366 server provides excellent four-socket processing capability with models supporting 3.16 and 3.66 GHz Xeon MP processors high-speed DDR2-based Active(TM) Memory and Active PCI-X 2.0 bus architecture. With a focus on reducing latency, increasing bandwidth, and delivering mainstream 64-bit computing capability on one of the most prevalent server instruction set(s) in the world (x86 ISA), the xSeries 366 servers are an excellent fit for today and future commercial enterprise applications. The x366 also offers phenomenal investment protection required to meet the demands of a changing marketplace delivering 32-bit compatibility on a 64-bit platform including dual-core capability that allows you to migrate with confidence according to your business needs, backed up by IBM, the most trusted name in servers. These high-density, Xeon-based servers are designed to handle complex commercial 64-bit applications requiring high-speed computing power, and advanced high-availability functions in a minimum amount of rack space. Applications include: Enterprise Resource Planning Business intelligence Online Transaction processing In-house developed applications such as Web services Collaboration applications (Microsoft Exchange and Lotus Notes) Server consolidation including virtualization Database Customer Relationship Management Supply Chain Management The ServeRAID 8i SAS Controller is a high-performance RAID controller that works with the onboard SAS controller of selected xSeries servers to provide RAID-5 capability for SAS hard drives. Back to top   Models Model Summary Matrix Models Xeon Processor Cache ECC Memory Type Hard Drive Mechanical 1RU 3.16 GHz 1 MB 2 GB 4-way capable open bay rack 2RU 3.66 GHz 1 MB 2 GB 4-way capable open bay rack E1U 2 x 3.66 GHz 1 MB 4 GB 4-way capable 3 x 36 GB SAS rack Customer Setup (CSU) These products are designated Customer Setup. Devices Supported The IBM(R) IBM eServer xSeries 366 is designed to maintain compatibility with the following IBM products. As a part of the ServerProven program, xSeries compatibility listings are updated on the Web. Detailed information relative to IBM and non-IBM vendor devices, adapters, software and network operating systems supported with xSeries servers can be accessed via the Web: http://www.ibm.com/pc/us/compat Part Description Number --------------------------------------- ------- Cable 250mm KVM Conversion Option 32P1636 1.5M KVM Conversion Option 32P1652 Netfinity Fibre Channel 5M Cable 03K9306 Netfinity Fibre Channel Long-Wave GBIC 03K9307 Netfinity Fibre Channel Short-Wave GBIC 03K9308 LC-LC Fibre Channel Cable - 1M 19K1247 LC-LC Fibre Channel Cable - 5M 19K1248 LC-LC Fibre Channel Cable - 25M 19K1249 LC-SC Fibre Channel Cable Adapter 19K1250 Short Wave SFP Module 19K1271 IBM Long Wave SFP Module 19K1272 Netfinity Fibre Channel 1 M Cable 36L9973 Netfinity 2M Ultra2 SCSI Cable 03K9310 Netfinity 4.2M Ultra2 SCSI Cable 03K9311 USB to Serial Cable 10K3661 NetVista USB - Parallel Printer Cable 19K4164 Controller IBM TotalStorage FC2-133 Host Bus Adapter 24P0960 Bus Adapter QLA2340F Adapter QLA2342F Adapter QLA2460 Dual Port Adapter QLA2462 ServeRAID 8i SAS Controller 13N2227 IBM Ultra320 SCSI Controller 2 13N2249 IBM ServeRAID-6M Ultra320 SCSI Controller (256MB Cache) 02R0988 IBM ServeRAID-6M Ultra320 SCSI Controller (128MB Cache) 32P0033 Encryption Host Attach Integrated xSeries Adapter (IXA) 1519100 LAN (2 MB memory) Myricom NetXtreme 1000 SX+ Fiber Ethernet Adapter 73P4001 NetXtreme 1000 T+ Ethernet Adapter 73P4101 NetXtreme 1000 T+ Dual Port Ethernet Adapter 73P4201 PRO/1000 MT Server Ethernet Adapter by Intel 31P9601 PRO/1000 MT Dual Port Server Adapter by Intel 73P2701 IBM iSCSI Server Adapter 73P3601 Memory Active Memory 4-Slot Memory Expansion Card 13M7409 2GB (2x1GB Kit) PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM 73P2866 4GB (2x2GB Kit) PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM 73P2867 8GB (2x4GB Kit) PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM 30R5145 Model Function Planar USB 2.0 Ports Planar Dual 1000 Ethernet System Hot Plug Solution Onboard ZCR Enabled Standard Service Processor (Vulture) Remote Supervisor SlimLine Adapter II Onboard Video - ATI Radeon 7000-M Keyboard 87-Key Space Saver II PS/2 Keyboard (Business Black) 28L3644 IBM Preferred Pro Full-size Keyboard - 104 Keys - PS/2 (Business Black) 25R6968 IBM USB Keyboard with UltrNav 39M7228 IBM USB Keyboard Enhanced Performance 90P0777 Monitor keyboard 17231JX (without keyboard) 32P1703 Size) MRP II Business Black 633147N image), business black 63324HN LCD monitor 6636AB1 LCD monitor 6636HB1 panel LCD monitor 6734AB0 LCD monitor 6734HB0 CRT monitor 673766N Mouse IBM USB Optical Wheel Mouse 90P0743 800 DPI ScrollPoint Optical Mouse 90P0742 Optical 3-Button Travel Wheel Mouse - 800dpi - PS/2 & USB (Raven) 31P7410 Spaceball 3D Input Device 25R6942 Power Power Supply (1300W) 13M7413 DPI 32A Single Phase C13 Enterprise PDU w/ IEC309 2P+N+G (250V) line cord 26K4241 DPI 60A Single Phase C13 Enterprise PDU w/ IEC309 2P+G (208V) line cord 28K4242 DPI 63A Single Phase C13 Enterprise PDU w/ IEC309 2P+N+G (250V) line cord 28K4243 DPI 60A Three Phase C13 Enterprise PDU w/ IEC309 3P+G (208V) line cord 28K4244 DPI 32A Three Phase C13 Enterprise PDU w/ IEC309 3P+N+G (250V) line cord 28K4245 DPI 30A Single Phase C13 Enterprise PDU w/ Nema L6-30P (208V) line cord 28K4246 DPI 60A Single Phase C19 Enterprise PDU w/ IEC309 2P+G (208V) line cord 28K4256 DPI 63A Single Phase C19 Enterprise PDU w/ IEC309 2P+N+G (250V) line cord 28K4257 DPI 60A Three Phase C19 Enterprise PDU w/ IEC309 3P+G 208V) line cord 28K4258 DPI 32A Three Phase C19 Enterprise PDU w/ IEC309 3P+N+G (250V) line cord 28K4259 IBM UPS3000XHV 200-240V UPS 2130R31 IBM UPS Extend Run Battery Pack 32P1692 Processor 3.16GHz 667MHz 1MB L2 Cache 13N0694 3.66GHz 667MHz 1MB L2 Cache 13N0695 Rack NetBAY 7ft Console Cable Set 09N4293 1.5M USB Conversion Option 73P5832 NetBAY 12ft Console Cable Set 94G7447 1x4 port Console Switch 09N4290 2x8 port Console Switch 09N4291 IBM 1x8 Console Switch (replaces 09N4290) 17351LX IBM 2x16 Console Switch (replaces 09N4291) 17352LX IBM 3M Console Switch Cable (PS/2) 31R3130 IBM 3M Console Switch Cable (USB) 31R3132 NetBAY Local Console Manager 1735L04 NetBAY Remote Console Manager 1735R16 NetBAY11 Standard Rack Cabinet 9306110 NetBAY25 Standard Rack Cabinet 9306250 NetBAY42 Standard Rack Cabinet 9306420 IBM 25U Standard Rack 9307-2SX IBM 42U Standard Rack Extension 9307-4EX IBM 42U Standard Rack 9307-4SX NetBAY42 Enterprise Expansion Rack Cabinet (EX) 930842E NetBAY42 Enterprise Rack Cabinet 930842S Storage IBM 24X Max SlimLine CD-ROM 32P0902# Slim 24x / 24x / 8x Combo-5 26K8766# IBM USB Portable Diskette Drive 05K9276 8X Slim DVD-ROM internal IDE drive 22P7047 ThinkPadŽ Multi-Burner Plus Ultrabay Enhanced Drive 73P3312 IBM NetBAY Tape Enclosure (Rack Mount) 0034B0X IBM TotalStorage DS300 - Single Controller LC 17011RL IBM TotalStorage DS300 - Single Controller 17011RS IBM TotalStorage DS300 - Dual Controller 17012RD IBM EXP400 Storage Expansion Unit 17331RU IBM EXP400 Storage Expansion Unit (EMEA) 17331RX IBM 4U Rackmount SCSI Tape Drive Enclosure 45594UX IBM 2U Full High Stand Alone SCSI Tape Drive Enclosure 4559FHX Storage - Fibre Channel IBM TotalStorage DS400 - Single Controller 17001RS IBM TotalStorage DS400 - Dual Controller 17002RD IBM TotalStorage DS4000 EXP100 Storage Expansion Unit 171010U IBM TotalStorage DS4000 EXP100 Storage Expansion Unit (EMEA) 171010X IBM DS4300 Storage Server 1722-60 IBM DS4300 Storage Server (EMEA) 1722-60 IBM TotalStorage DS4300 Single Controller Unit 17226LU IBM TotalStorage DS4300 Single Controller Unit (EMEA) 17226LX IBM TotalStorage DS4100 Storage Server 1724-10 IBM TotalStorage DS4000 EXP700 Expansion Unit 17401RU IBM TotalStorage DS4000 EXP700 Expansion Unit (EMEA) 17401RX IBM TotalStorage DS4700 Storage Server 17421RUU IBM TotalStorage DS4700 Storage Server (EMEA) 17421RXX IBM TotalStorage DS4900 Storage Server 174290U IBM TotalStorage DS4900 Storage Server (EMEA) 174290X IBM TotalStorage DS4300 Turbo Fibre Channel Storage Server 24P82150 Storage - HDD-SAS IBM 36GB 10K 2.5" SAS 26K5654 IBM 73GB 10K 2.5" SAS 26K5655 IBM 256MB USB 2.0 Memory Key 22P9025 IBM 256MB USB 2.0 High Speed Memory Key 22P9228 IBM 128MB USB 2.0 High Speed Memory Key 22P9229 IBM 512MB USB 2.0 Memory Key 22P9230 Storage - Shared Storage Subsystem Storage - Tape IBM 160/320 GB SDLT Internal SCSI Tape Drive 59P6736 IBM 200/400GB LTO FH Tape Drive 59P67440 IBM LTO2 1x8 Tape Autoloader 36232LX1 IBM SDLT 320 1x8 Tape Autoloader 36232SX IBM SDLT/LTO Modular Tape Library 4560SLX Switch IBM TotalStorage Fibre Channel Switch H08 2005H08 IBM TotalStorage Fibre Channel Switch H16 2005H16 IBM TotalStorage Storage Switch 2006L10 McData 4300 Fabric Switch (12-port) 2034212 Cisco MDS 9120 Multilayer Fabric Switch 2061-020 Cisco MDS 9140 Multilayer Fabric Switch 2061-040 Configuration Topspin   Model Conversions None. Back to top   Technical Description Physical Specifications Operating Environment Limitations Hardware Requirements Software Requirements IBM eServer xSeries 366 servers are rack-optimized 3 U enterprise application network servers using industry-standard architectures. These models incorporate powerful Xeon MP processors. Additional standard features include standard ECC Chipkill system memory and the following integrated functions: Serial Attached SCSI (SAS)controller Six Active PCI-X 2.0 Slots @ 64-bit/266 MHz SVGA video controller with 8 MB of video memory Integrated Broadcom 5704 Dual-port 10/100/1000 Gigabit Ethernet Standard storage device includes a DVD-ROM. Model Configuration Xeon L2 SCSI Power Model Processor Cache Memory HDD Iface Supply -------- ---------- ----- -------- -------- ----- ------ 8863-1RU 3.16 GHz 1 MB 2 GB ECC open bay SAS 1 8863-2RU 3.66 GHz 1 MB 2 GB ECC open bay SAS 1 8863-E1U 2x3.66 GHz 1 MB 4 GB ECC 3x36GB SAS 2 8863-E2G 2x3.66 GHz 1 MB 2 GB ECC open bay SAS 1 8863-E3x 3.16 GHz 1 MB 2 GB ECC 2x73GB SAS 1 8863-E4x 2x3.66 GHz 1 MB 2 GB ECC 2x73GB SAS 1   The IBM eServer xSeries 366 has four-way SMP capability by adding multiple processors of the same type, speed, and cache size. System memory can be expanded to 64 GB by removing the two standard DIMMs and adding 3 memory expansion card options and a 4 GB PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM in each of the 4 DIMM sockets (when 4GB DIMMs become available). This model contains six unpopulated, hot-swap bays They provide six storage expansion bays and six expansion slots and support up to two hot-swap power supplies. One 1300-watt, hot-swap power supply with auto restart capability is standard. By adding one optionally available xSeries 1300 W Hot-Swap Redundant Power Supply option n+n redundancy can be maintained throughout various configurations. Six Active PCI-X 2.0 Slots @ 64-bit/266 MHz The IBM eServer xSeries 366 standard features include: One Xeon MP processor Three additional sockets for SMP Xeon MP processor upgrades 2 GB of PC2-3200 ECC DDR2 SDRAM Chipkill ECC memory support on memory controller - corrects many single-, two-, three-, and four-bit memory errors SVGA Video controller with 16 MB of video memory Serial Attached SCSI (SAS) controller Integrated Broadcom 5704 Dual-port 10/100/1000 Gigabit Ethernet Time Of Day clock and battery Standard Device Ports/Connectors: Keyboard Pointing Device SVGA port Two Serial ports Two 10/100/1000 Mbps Ethernet ports using RJ-45 connectors Three USB ports Remote System Management Adapter ports; Ethernet and RS485 Note: The processor GHz speed is the internal processor speed. External processor operations to system memory and to the PCI bus controller run at 100 MHz. Physical Specifications IBM eServer xSeries 366: 8863-1RU 8863-2RU --------- --------- Processor Xeon MP Xeon MP Internal speed 3.16 GHz 3.66 GHz External speed 667 MHz 667 MHz Number standard 1 1 Maximum 4 4 L2 cache (full speed) 1 MB 1 MB L3 cache (full speed) 0 MB 0 MB Memory (PC2-3200 DDR2) 2 GB ECC 2 GB ECC DIMMs 2 x 1 GB 2 x 1 GB DIMM sockets std 4(1) 4(1) DIMM sockets max 16(1) 16(1) Capacity 64 GB(2) 64 GB(2) Video SVGA SVGA Memory 16 MB 16 MB SAS SCSI controller 3.0 GHz 3.0 GHz Links 6 6 Connector internal 2 2 Connector external 0 0 HDD 0 0 Total bays 5.25-inch slim media 1 1 Hot-swap HDD 6 6 Accessible 7 7 Internal capacity 440.4 GB(3) 440.4 GB(3) PCI-X 2.0 slots 6 6 Slots available 6 6 Management Processor BMC Standard Standard RSA-II SlimLine Optional Optional Dual Ethernet 10/100/1000 Mbps 10/100/1000 Mbps controller CD-ROM / DVD Optional Optional DVD / ROM Standard Standard Power supply 1300 W 1300 W Number standard 1 1 Maximum 2 2 Hot-swap Yes Yes Redundant power Optional Optional Auto restart Yes Yes   Note: (1) Number of sockets are based on installation of the 4 memory expansion cards (13M7409). Note: (2) Capacities are based on installation of the 4 memory expansion cards (13M7409) and 4x4 GB DIMMs installed in each card (when 4GB DIMMs become available). Note: (3) Capacities are based on installation of six 73.4 GB 2.5" SAS HDDs. For the latest information on supported HDD options, visit: http://www.ibm.com/pc/us/compat 8863-E1U --------- Processor Xeon MP Internal speed 3.66 GHz External speed 667 MHz Number standard 2 Maximum 4 L2 cache (full speed) 1 MB L3 cache (full speed) 0 MB Memory (PC2-3200 DDR2) 4 GB ECC DIMMs 4 x 1 GB DIMM sockets std 4(1) DIMM sockets max 16(1) Capacity 64 GB(2) Video SVGA Memory 16 MB SAS SCSI controller 3.0 GHz Links 6 Connector internal 2 Connector external 0 HDD 3 x 36.4GB SAS Total bays 5.25-inch slim media 1 Hot-swap HDD 6 Accessible 7 Internal capacity 440.4 GB(3) PCI-X 2.0 slots 6 Slots available 6 Management Processor BMC Standard RSA-II SlimLine Optional ServeRAID 8i SAS Ctlr Standard Dual Ethernet 10/100/1000 Mbps controller CD-ROM / DVD Optional DVD / ROM Standard Power supply 1300 W Number standard 2 Maximum 2 Hot-swap Yes Redundant power Optional Auto restart Yes   Note: (1) Number of sockets are based on installation of the 4 memory expansion cards (13M7409) Note: (2) Capacities are based on installation of the 4 memory expansion cards (13M7409) and 4x4 GB DIMMs installed in each card (when 4GB DIMMs become available). Note: (3) Capacities are based on installation of six 73.4 GB 2.5" SAS HDDs. For the latest information on supported HDD options, visit: http://www.ibm.com/pc/us/compat 36.4 GB 10K 2.5-inch Serial-attached SCSI Hot-swap HDD Characteristics Formatted capacity: 36,400 million bytes(1) Average read seek time: 4.7 ms Burst transfer rate (maximum): 3.0 Gb/s Average latency: 2.99 ms Drive rotation speed (RPM): 10,000 rpm PFA/S.M.A.R.T enabled: Yes Interface: SAS 3.0 GHz 73.4 GB 10K 2.5-inch Serial-attached SCSI Hot-swap HDD Characteristics Formatted capacity: 73,400 million bytes(1) Average read seek time: 4.7 ms Burst transfer rate (maximum): 3.0 Gb/s Average latency: 2.99 ms Drive rotation speed (RPM): 10,000 rpm PFA/S.M.A.R.T enabled: Yes Interface: SAS 3.0 GHz ServeRAID 8i Serial-Attached SCSI Controller Characteristics Transfer Rate (maximum): 3GB/s Interface: SAS 3.0 GHz Cache Memory: 256MB Measured Performance at 6 SFF Drives 16K OLTP: 850 IO/sec 512 Bytes out of cache Performance: 25,000 IO/sec Sequential Reads 64K: 312MB/sec 8x DVD-ROM drive characteristics ThinkPad(R) Multi-Burner Plus Ultrabay(TM) Enhanced Drive See IBM United States Hardware Announcement 104-326 for details. Video subsystem ATI Radeon 7000M embedded 16 MB SDRAM standard/maximum video memory 128-bit graphics engine with 8, 16, and 32 bpp mode acceleration 32 bpp (4G colors/True Color) support digital 24-bit TMDS digital video signal to the optional RSA-2 SlimLine DDC2 ci monitor communications support Supported video mode capabilities for the SVGA PCI controller: Microsoft** Windows 2000 and Windows** 2003: Refresh Resolution Colors Rate (Hz) --------------- ----------- -------------- 640 x 480 x 8 256 60, 72, 75, 85 640 x 480 x 16 64K 60, 72, 75, 85 640 x 480 x 32 16 million 60, 72, 75, 85 800 x 600 x 8 256 60, 72, 75, 85 800 x 600 x 16 64K 60, 72, 75, 85 800 x 600 x 32 16 million 60, 72, 75, 85 1024 x 768 x 8 256 60, 70, 75, 85 1024 x 768 x 16 64K 60, 70, 75, 85 1024 x 768 x 32 16 million 60, 70, 75, 85 Note: NetWare and SCO drivers are contained in the respective operating system packages or bulletin boards. Dimensions 3 U rack drawer: Width: 442.0 mm (17.4 in) Depth: 701.0 mm (27.6 in) Height: 128.4mm (5.05 in) Minimum configuration: 28.6 kg (63 lb) Maximum configuration: 37.6 kg (83 lb) Electrical 100 to 127 (nominal) V ac; 50 Hz or 60 Hz; 8.5 A 200 to 240 (nominal) V ac; 50 Hz or 60 Hz; 8.5 A Input kilovolt-amperes (kVA) (approximately): Minimum configuration: 0.37 kVA (two power supplies) Maximum configuration: 1.2 kVA (two power supplies) Btu output: Ship configuration: 1,262 Btu/hr (361 watts) Full configuration: 4,053 Btu/hr (1045 watts) Noise level horizontal position: 6.6 bels Note: The noise emission level stated is the declared (upper limit) sound power level, in bels, for a random sample of machines. All measurements made in accordance with ISO 7779 and reported in conformance with ISO 9296. IBM eServer xSeries 366 servers are intended for use as rack-drawer servers and are tested and designed to operate in a horizontal position. Standards These systems support or comply with the following standards: Multi Processor Specification (MPS) 1.4. Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3. In addition to the above standards, they are compatible with the PCI-X specification 2.0. Equipment approvals and safety FCC - Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 4, Class A IEC/UL 60950-1, 1st edition CAN/CSA - C22.2 No. 60950-1-03 NOM-019(10) Note: (10)This server is certified by the respective UL and NOM agencies. Operating Environment Temperature: 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 to 914 m (0 to 3,000 ft) 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 to 2,133 m (3,000 to 7,000 ft) Relative humidity: 8% to 80% Maximum altitude: 2,133 m (7,000 ft) Limitations The IBM eServer xSeries 366 servers are shipped with 2 GB (2x1GB) of memory. A maximum of up to 64 GB of system memory is supported (when 4GB DIMMs become available) by adding three additional memory expansion card options and a 4 GB PC2-3200 CL3x4 ECC DDR2 SDRAM RDIMM in each of the 4 DIMM sockets. All supported system memory is addressable through direct memory access (DMA). This server supports 1 GB, 2 GB, and 4 GB 1.8V, 240-pin, 8-byte RDIMMs. Supported DIMMs can coexist in the same server; however, memory DIMMs of the same capacity must be installed in matched pairs. Refer to the Planning Information section or the xSeries server Web page memory options. The IBM eServer xSeries 366 supports up to 6 HDDs which limits the ServeRAID 8i SAS Controller to reach RAID configurations of RAID 0, 1, 5, 1E, 00, 10, 50, 1E0, 5EE, but not RAID 60. Use the version of ServerGuide that is shipped with the system, or a later version, to load software and drivers. Earlier versions of ServerGuide may not be compatible with the server. Refer to the Software Requirements section for operating system limitations. Hot-swap Limitations PCI hot-plug is not supported in Red Hat Enterprise Linux 3. PCI hot-plug support is limited in SUSE Linux Enterprise Server 9, and Novell NetWare 6.5. For Linux, multi-function adapters (those that use PCI bridges) are currently not supported. For Netware, only hot-replace of adapters is supported. Hardware Requirements For attended installation of an operating system, this server requires a compatible: Keyboard Mouse Display Unattended or remote installation may be performed without requiring some or all of these components. Review your unattended software installation program information for specific hardware configuration requirements. For service, the server requires a compatible: Keyboard Mouse Display When having the unit serviced, plan to have these components attached to your server either directly or indirectly via a console switch. Software Requirements Software Compatibility The following software products have been tested by IBM and software publishers in the latest available versions, and where appropriate, are or will soon be certified by the publisher to be compatible with this server. Software Description Publisher ---------------------------------------------------- --------- Network OS Windows Server 2003, Enterprise Edition Microsoft Windows Server 2003, Standard Edition Microsoft Red Hat Enterprise Linux AS (v3 for AMD64 and Intel EM64T) Red Hat Red Hat Enterprise Linux ES (v3 for AMD64 and Intel EM64T) Red Hat SUSE LINUX Enterprise Server 9 for AMD64 and Intel EM64T SuSE Clustering OS Microsoft Cluster Server (IBM DS4300 Storage Server) Microsoft Microsoft Cluster Server (IBM DS4900 Storage Server) Microsoft Novell Cluster Services Version 1.8 Novell Network OS Application Norton Anti-Virus Program - Latest version Norton Microsoft Virtual Server 2005, Enterprise Edition Microsoft Microsoft Virtual Server 2005, Standard Edition Microsoft Real Time Diagnostics v 2.14 IBM Programming requirements The following network operating systems have been tested for compatibility with the IBM eServer xSeries 366 server: Microsoft: Windows 2000 Advanced Server Windows 2000 Server Windows Server 2003 Standard Edition (32-bit) Windows Server 2003 Enterprise Edition (32-bit) Linux: Red Hat Enterprise Linux 3 Advanced Server 64-bit SuSE Linux Enterprise Server 9 UL (SLES9) 64-bit Other: VMware ESX Server 2.5.1 Note: For information on additional support, certification, and versions of network operating systems, visit: http://www.ibm.com/pc/us/compat Back to top   Publications The following publications and CD-ROMs are shipped with the IBM eServer xSeries 366 servers. IBM eServer xSeries 366 Installation Guide contains an introduction to the computer, installation and setup, installing options, reference information, and problem determination. The installation guide has easy-to-use text and illustrations to enable you to quickly set up your IBM eServer xSeries 366 server. ServerGuide contains online publications and drivers to support the IBM eServer xSeries 366 server. In addition, it includes a set of easy-to-use utilities on CD to help you install several popular network operating systems. IBM Director systems-management software is included. Note: Software versions, features, and functions shipped with these systems may change as new releases become available or may be discontinued at any time. Back to top   Features -- Specify/Special/Exchange No Charge Specify Codes Special Feature Codes -- Chargeable Feature Exchanges No Charge Specify Codes None. Special Feature Codes -- Chargeable Note: US, LA, CAN, and EMEA are GAV models. Order Description Machine Models Number -------------------- ---------- -------- ------ xSeries 366 8863 1RU 88631RU 8863 2RU 88632RU Express Model 8863 E1U 8863E1U Part Description Number --------------------------------------------------------- ------- xSeries 3.16GHz 667MHz 1MB L2 Cache 13N0694 Upgrade for 64-bit Xeon Processor MP xSeries 3.66GHz 667MHz 1MB L2 Cache 13N0695 Upgrade for 64-bit Xeon Processor MP ServeRAID 8i SAS Controller 13N2227 1300w Hot-Swap Redundant Power Supply 13M7413 Active Memory(TM) 4-Slot Memory Expansion Card 13M7409 8 GB (2x4GB Kit) PC2-3200 CL3 ECC DDR2 SDRAM RDIMM 30R5145 36.4 GB 10K 2.5-inch SAS HDD 26K5654 73.4 GB 10K 2.5-inch SAS HDD 26K5655 RAID 0 - SAS Primary Array - minimum of 1 HDD req (MI) 32R0700 RAID 1 - SAS Primary Array - 2 HDDs req (MI) 32R0701 RAID 1E - SAS Primary Array - 3 HDDs req (MI) 32R0702 RAID 5 - SAS Primary Array - minimum of 3 HDDs req (MI) 32R0703 RAID 5EE - SAS Primary Array - minimum of 4 HDDs req (MI) 32R0704 RAID 0 - SAS Secondary Array - minimum of 1 HDD req (MI) 32R0705 RAID 1 - SAS Secondary Array - 2 HDDs req (MI) 32R0706 RAID 1E - SAS Secondary Array - 3 HDDs req (MI) 32R0707 RAID 5 - SAS Secondary Array - minimum of 3 HDDs req (MI) 32R0708 RAID 5EE - SAS Secondary Array - minimum of 4 HDDs req (MI) 32R0709 Internal - RAID - Setup (MI) 32R0720 Internal - RAID - Setup by Customer (MI) 32R0721 Note: MI = Manufacturing Instruction for x366 RAID   Feature Exchanges Not available. Back to top   Accessories None. Customer Replacement Parts Number Description --------- ----------------------------- Cooling 48P9687 Hi SP 92mm FAN (CRU) 90P5051 HI SP 80mm FAN (CRU) Planar 73P2870 1GB PC2-3200 ECC DDR2 73P2871 2GB PC2-3200 ECC DDR2 30R5146 4GB PC2-3200 ECC DDR2 13M7878 64-bit Intel Xeon MP 3.16 GHz 13M7879 64-bit Intel Xeon MP 3.66 GHz 73P9324 Remote Supervisor Slimline Adapter II 23K4105 CPU Card 23K4106 PCIX Card 23K4107 Active Memory 4-Slot Memory Expansion Card 23K4111 Power Backplane 23K4109 Super I/O Card 13M7880 SAS HDD Backplane 01R1477 Lightpath and Op Panel Card 13M7881 Media Backplane 73P6869 Active PCIX Hotplug Sensor Power 36L8886 Line Cord 24R2708 Power Supply, 1300W 74P4484 10.1 Processor VRM Cable 00N6996 Serial Cable 24P1067 Active PCIX Cable 25K9610 SAS 4X Data Cable 25K9618 USB Cable 25K9622 SAS Power Cable 25K9626 CD/DVD IDE Cable 25K9628 Lightpath & Op Panel Cable Heatsink 26K8805 Processor Heatsink 26K8836 Heatsink Retention Module 26K9020 Processor Heatsink Filler Miscellanous 01R1479 Air Block 03K9050 PCI Spacer 24P1295 Lift Handle Kit 25R5236 Rack Slide Kit 25R5238 Cable Mgmt Arm 26K5413 DVD-ROM 26K8680 HDD Blank Filler 26K8923 x366 System Labels 26K8941 AC Inlet Plug Filler 26K8943 Scalability Filler 26K8946 Chassis Assembly 26K8947 Chassis Top Cover Assembly 26K8948 EIA Mounting Brackets 26K8950 Power Supply Structure 26K8951 PCIX Card Guide 26K8956 x366 System Bezel 33F8354 3.0V Battery 59P4739 Alcohol Wipe 59P4740 Heatsink Grease   Back to top   Machine Elements None. Back to top   Supplies None. Diskettes None. Trademarks (R), (TM), * Trademark or registered trademark of International Business Machines Corporation. ** Company, product, or service name may be a trademark or service mark of others. Windows is a trademark of Microsoft Corporation.  © IBM Corporation 2005. Back to top